TM 10-4630-207-13&P
0045 00
2
1
Figure 7. Breakaway Lever Mounting Bolts
h. Remove dust cap from wheel cylinder bleeder valve.
i.
Install a bleeder hose on the bleeder valve (figure 8, item 1) of the farthest wheel cylinder from
the breakaway lever. Bleed the rear axle first.
j.
Submerse the other end of the hose in a glass container of brake fluid so bubbles can be
observed.
k.
Open the bleeder valve (figure 8, item 1) and have the operator stroke and maintain pressure on
the break-away lever. Brake fluid and/or bubbles will flow into the jar.
l.
Close the bleeder valve when bubbles stop. The operator can allow the break-away lever to
return to its rest position.
0045 00-5
