TM 10-4630-207-13&P
0036 00
1
Figure 15. Wire Clamp
25. Strip 6-in of outer insulation off of wire (figure 16, item 1).
26. Cut wires to same length as those being replaced.
27. Strip 3/8-in insulation off individual wires.
28. Fasten work light hood in place with mounting nut (figure 17, item 1) and bolt (figure 17, item 2).
29. Feed wires through work light hood (figure 17, item 3).
30. Crimp terminals on work light wires (figure 17, item 4).
31. Connect terminals to work light.
32. Install work light (figure 17, item 5) into hood.
0036 00-11
