TM 10-4630-207-13&P
0034 00
9. If the battery box is to be replaced, remove the cushioning material (figure 4, item 2) from the bottom
of the box.
10. Remove two bolts and flat washers (figure 4, item 3) from the bottom of the battery box. Retain
hardware. Remove the box (figure 4, item 1) from the skid.
1
3
2
Figure 4. Removing Battery Box
11. Install a new battery box (figure 5, item 1), as necessary, with retained hardware.
1
Figure 5. Battery Box
12. Install a new negative battery cable (figure 6, item 1), as necessary, onto engine mount (figure 6,
item 2) with the retained hardware.
13. Install a new positive battery cable (figure 6, item 3), as necessary, onto the starter (figure 6, item 4)
with the retained hardware.
0034 00-3
