TM 10-4630-207-13&P
0034 00
4. Remove the battery cable clamp (figure 2, item 4) from the positive terminal (figure 2, item 5) by
loosening the hex nut (figure 2, item 6) and moving clamp off the terminal (figure 2, item 5).
5
4
1
2
6
3
Figure 2. Removing Cables from Battery
5. If negative cable (figure 3, item 1) has to be replaced, disconnect the cable from the engine mount
(figure 3, item 2) by removing the hex bolt and washer (figure 3, item 3). Retain hardware. Remove
cable.
6. If positive cable (figure 3, item 4) has to be replaced, disconnect the cable from the starter (figure 2,
item 5) by removing the hex nut and washer (figure 3, item 6). Retain hardware. Remove cable.
1
3
4
2
6
5
Figure 3. Removing Cables from Engine Mount and Starter
7. Remove battery from battery box (figure 4, item 1).
8. Dispose of battery in accordance with Unit SOP and local regulations.
0034 00-2
