TM 10-4630-207-13&P
0035 00
2. Work light hood replacement:
a. Ensure battery is disconnected from negative terminal.
b. Remove light bulb (figure 2, item 1) from hood (figure 2, item 2).
c.
Disconnect wiring (figure 2, item 3) from bulb (figure 2, item 1).
d. Remove bulb
e. Remove wiring from hood (figure 2, item 2).
f.
Loosen and remove mounting nut (figure 2, item 4) and bolt (figure 2, item 5).
g. Remove hood and discard in accordance with unit SOP in an approved container.
h. Install new hood.
i.
Fasten hood in place with mounting nut (figure 2, item 4) and bolt (figure 2, item 5).
j.
Insert wiring (figure 2, item 3) into hood.
k.
Connect wiring to bulb (figure 2, item 1).
l.
Insert bulb into hood (figure 2, item 2).
