TM 10-4630-207-13&P
0033 00
6
1
6
5
7
4
3
2
8
Figure 1. Removing Components from the Oil Catch Muffler
WARNING
The oil catch muffler is heavy (40-lbs). To prevent injuries, two people are
required to remove it from the trailer.
7. While supporting the oil catch muffler (figure 2, item 1), remove hex bolts, nuts and flat washers
(figure 2, item 2) securing the muffler to the tank bracket (figure 2, item 3). Retain hardware.
8. Lift the oil catch muffler (figure 2, item 1) off the bracket (figure 2, item 3).
9. Place new oil catch muffler (figure 2, item 1) onto tank bracket (figure 2, item 3) and install hex bolts,
nuts and flat washers (figure 2, item 2).
1
3
2
2
Figure 2. Removing Oil Catch Muffler from Bracket
10. If breather hose (figure 3, item 1) is being replaced, place hose clamps (figure 3, item 2) over both
hose ends and install hose onto oil catch muffler (figure 3, item 3) and vacuum pump port (figure 3,
item 4).
11. Tighten hose clamps (figure 3, item 2) securing breather hose to vacuum pump port (figure 1, item
0033 00-2
