TM 10-4630-207-13&P
0027 00
To disassemble the control panel, proceed as follows:
1. Disconnect the orange and white external wire harness (figure 2, item 1) from the connector (figure
2, item 2) at the rear of the control panel.
2
1
Figure 2. Control Panel External Harness Connection
2. Remove two hex nuts (figure 3, item 1) securing the control panel (figure 3, item 2) to the bottom of
the control post bracket.
3. Remove control panel (figure 3, item 2) and bracket (figure 3, item 3) from control post. Remove the
hex nuts (figure 3, item 4) securing the control panel (figure 3, item 2) to the bracket (figure 3, item
3).
2
1
4
3
Figure 3. Removing Control Box Hardware
0027 00-2
