TM 10-4630-207-13&P
0024 00
3
2
4
5
1
Figure 2. Closing Intake Valve. Disconnect Hydraulic Line
4. Remove dust cap (figure 3, item 1) from drain valve (figure 3, item 2).
5. Remove six lower hex nuts and bolts (figure 3, item 3) securing front flange (figure 3, item 4) to rear
flange (figure 3, item 5).
6. Remove two remaining hex nuts (figure 3, item 6) securing front flange (figure 3, item 4) to drain
valve (figure 3, item 2)
7. Remove front flange (figure 3, item 4) from drain valve (figure 3, item 2)
8. Remove 4-inch gasket (figure 3, item 7) and discard.
5
6
2
2
1
5
7
3
4
Figure 3. Removing Dust Cap and Front Flange/Gasket
0024 00-3
