TM 10-4630-207-13&P
0023 00
NOTE
Prior to installing a new intake valve, obtain two new 21/2-inch gaskets for use during
the installation. These are mandatory replacement parts.
12. Place a new 21/2-inch gasket (figure 6, item 1) onto the rear flange (figure 6, item 2) as shown.
WARNING
The intake valve assembly is heavy. To prevent injuries, two people are
required to remove it.
13. Place new intake valve (figure 6, item 3) over the gasket onto the rear flange (figure 6, item 2) and
pass studs (figure 6, item 4) through top two holes on flange as shown.
14. Install two nuts (figure 6, item 5) as shown and hand tighten.
3
2
4
1
5
2
Figure 6. Installing Rear Gasket and Intake Valve
15. Place a new 21/2-inch gasket (figure 7, item 1) onto the intake valve (figure 7, item 2) as shown.
16. Install hex nuts and bolts (figure 7, item 3) securing front flange (figure 7, item 4) to intake valve and
rear flange (figure 7, item 5).
0023 00-5
