TM 10-4320-344-24
4.4.13 Crankcase Rear Cover Maintenance, Models 609-C and US636HCCD-1.
This task covers:
4.4.13.1 Removal
4 .
4 .1 3 . 3 I n s t a l l a t i on
4 .
4 .1 3 . 2 R e p a ir
INITIAL SETUP
Tools
Material/Parts (Continued)
General Mechanic’s Automotive
Sealing Ring (TM 10-4320-344-24P)
Tool Kit, Appendix B, Section
III, Item 1
Equipment Conditions
Puller Kit, Appendix B, Section III,
Oil Pan Assembly removed, paragraph
Item 2
3 .
8 .
1
2.
Material/Parts
Flywheel Cover removed, paragraph 4.4.12.
Grease, Appendix C, Item 12
Oil, Appendix C, Item 15
General Safety Instructions
Rags, Appendix C, Item 20
Do not work on equipment without follow-
Sealing Compound, Appendix C, Item 23
ing standard shop safety practices.
Gasket (TM 10-4320-344-24P)
4.4.13.1 Removal.
Figure 4-18.
Crankcase Rear Cover Maintenance, Models
a.
Remove eight rear cover bolts (Figure 4-18, 1), flat
cover (3) from crankcase (4).
b .
Remove rear cover gasket (5).
c .
Remove crankshaft sealing ring
( 6 ).
609-C and US636HCCD-1.
washers (2) and rear
Discard gasket (5).
(6) from rear cover (3). Discard sealing ring
4-40
