TM 10-4320-344-24
a .
Remove four bolts (Figure 4-17,
1), lock washers (2), and cover plate (3) from
flywheel cover (4).
Discard lock washers (2).
b.
Remove bolt (5) and lock washer (6).
Discard lock washer (6).
c .
Remove nine bolts (7), lock washers (8), and flywheel cover (4) from
crankcase.
Discard lock washers (8).
d .
Remove three bolts (9), lock washers (10), and cover plate (11).
Discard lock
washers (10).
4.4.12.2 Repair.
a .
Inspect all components and mounting hardware for damage.
b .
Replace all damaged or defective components.
4.4.12.3 Installation.
a .
Position cover plate (11) against flywheel cover (4) and secure with three new
lock washers (10) and bolts
b .
Position flywheel cover (4)
washers (8) and bolts (7).
c .
Install new lock washer (6)
d.
Position cover plate (3) on
washers (2) and bolts (1).
( 9 ).
against crankcase and secure with nine new lock
and bolt (5).
flywheel cover (4) and secure with four new lock
4-39