TM 10-4320-344-24
4.4.11 Bellhousing Maintenance, Model 609-A. (Continued)
Figure 4-16.
Bellhousing Maintenance.
•
Do not use cleaning solvent without proper ventilation and clothing.
Do not smoke or use near open flame or excessive heat.
Dry cleaning
solvent is potentially dangerous to personnel and property.
Clean
parts in a well-ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber gloves to protect eyes and skin.
Wash
exposed skin thoroughly.
Failure to obey this warning may result in
personal injury or death.
•
To prevent the possibility of embedding foreign objects in the eyes,
safety glasses must be worn when using compressed air.
b .
Clean all components with cleaning solvent and dry with compressed dry air.
c .
Inspect all components and mounting hardware for damage.
d .
Ensure bellhousing studs in engine block are tight and in good condition.
Check for worn or stripped threads.
Tighten loose studs.
e.
Replace all defective components.
4-36
