TM 10-4320-344-24
o .
If engine speed overshoots command speed, turn I pot (8) a small amount to the
left. Repeat steps m and n until engine no longer overshoots coxmnand speed.
NOTE
Changing the adjustments A, D, DROOP, and GAIN may cause a slight engine
speed change which will require resetting the SPEED adjustment.
p.
If engine speed changes during adjustments, readjust engine speed.
q.
Position cover (3) on governor control box (4).
r .
Install four washers (2) and screws (1). Tighten screws (1).
3-51