TM 10-4320-344-24
2.21.48.2 Repair.
Do not use cleaning solvent without proper ventilation and clothing.
Do not
smoke or use near open flame or excessive heat.
Dry cleaning solvent is
potentially dangerous to personnel and property.
Clean parts in a well-
ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber
gloves to protect eyes and skin.
Wash exposed skin thoroughly.
Failure to
obey this warning may result in personal injury or death.
a .
Clean cylinder head cover (3) and gasket mounting surfaces with rag dampened
in cleaning solvent.
Dry thoroughly.
b .
Inspect all components and mounting hardware for damage.
c .
Replace all defective components.
2.21.48.3 Installation.
Position new gasket (4) and cylinder head cover (3) on
cylinder head (5) and secure with flat washer (2) and screw (1).
2-367
