TM 10-4320-344-24
2.21.47 Cylinder Head Cover Maintenance. Model 609-A.
This task covers:
2.21.47.1 Removal
2 .
2
1 .4 7 . 3 I n s t a l l a t i on
2 .
2
1 .4 7 . 2 R e p a ir
INITIAL SETUP
Tools
General Mechanic’s Automotive
Tool Kit, Appendix B, Section
III, Item 1
Goggles, Appendix B, Section III,
Item 2
Material/Parts
Gloves, Appendix C, Item 11
Rags, Appendix C, Item 20
Solvent,
Dry Cleaning, Appendix C,
Item 26
Gasket (TM 10-4320-344-24P)
Plastic Washers (TM 10-4320-344-24P)
Equipment Conditions
Pumping station shut down, TM 10-4320-
344-10.
Breather Cap removed, paragraph 2.21.46.
General Safety Instructions
Do not work on equipment that is not
securely stabilized to prevent rolling
o r s l i d i n g.
Do not work on equipment without follow-
ing standard shop safety practices.
2.21.47.1 Removal.
Remove three nuts (Figure 2-162,
1), plastic washers (2), cylinder
head cover (3), and gasket (4).
Discard plastic washers (2) and gasket (4).
Figure 2-162.
Cylinder Head Cover Maintenance, Model 609-A.
2-364
