2.21.28 Oil Cooler Replacement, Model 609-A. (Continued)
To prevent burns or other injuries allow oil lines, oil, engine coolant, and
engine to cool before removing oil cooler.
Failure to obey this warning may
result in serious personal injury.
a.
Remove four nuts (Figure 2-143, 1), lock washers (2), screws (3), two clamps
(4), and oil cooler (5).
Discard lock washers (2).
b.
Remove two screws (6), lock washers (7), spacer (8), and mounting bracket (9).
Discard lock washers (7).
2.21.28.2 Repair.
a .
Inspect all components and mounting hardware for damage.
b .
Replace all defective components.
2.21.28.2 Installation.
a .
Position spacer (8) and mounting bracket (9) against engine and secure with
two new lock washers (7) and screws (6).
b .
Position oil cooler (5) and two clamps (4) on mounting bracket (9) and secure
with four screws (3), new lock washers (2), and nuts (1).
2-326
TM 10-4320-344-24
