TM 10-4320-344-24
2.21.27 Oil Filter and Base Assembly Replacement, Models 609-C and US636HCCD-1. (Continued)
2.21.27.3 Installation.
a .
b .
c .
d.
e .
f .
g.
Install new flat washer (8) and plug (7) on support (4).
Position adapter (6), two new gaskets (5), and support (4) against engine (9)
and secure with two new lock washers (3) and bolts (2).
Lightly coat gasket on new oil filter (1) with engine oil and install oil
filter (1) on support (4).
Refer to LO 10-4320-344-12 and add engine oil.
Refer to T M 10-4320-344-10, start engine, check for oil leaks, and stop
engine.
Refer to LO 10-4320-344-12 check and add engine oil as required.
Remove pan from under oil filter (1) and properly dispose of oil in accordance
with standing operating procedures.
2-324
