TM 10-4320-344-24
2.21.6 Fuel Transfer Pump Assembly Maintenance.
This task covers:
2.21.6.1 Service
2.21.6.3 Removal
2 .
21 . 6 . 2 T e s t
2.21.6.4 Installation
INITIAL SETUP
Tools
Equipment Conditions (Continued)
General Mechanic’s Automotive
For replacement, Fuel Inlet and Fuel
Tool Kit, Appendix B, Section
Outlet Hoses removed and capped,
III, Item 1
paragraph 2.21.2.
Materials/Parts
General Safety Instructions
Pan, Appendix C, Item 19
Do not work on equipment that is not
Rags, Appendix C, Item 20
securely stabilized to prevent
Gasket (TM 10-4320-344-24P)
r o l l i n g o r s l i d i n g.
Fuel Transfer Pump Assembly Repair Kit
(TM 10-4320-344-24P)
Diesel fuel is flammable. Keep
sparks, cigarettes, and open flame
Equipment Conditions
away from fuel system components.
Pumping station shut down, TM 10-4320-344-10.
Do not work on equipment without
following standard shop safety
Air Cleaner Assembly removed, paragraph 2.14.3 practices.
(US636HCCD-1).
This procedure applies to Model US636HCCD-1. The procedures for Model 609-A
and 609-C are similar.
2.21.6.1 Service. (Models 609-C and US636HCCD-1 only.)
Figure 2-117. Fuel Transfer Pump Assembly Servicing.
2-274
NOTE
