TM 10-4320-318-14
5-6. MAINTENANCE OF FLYWHEEL HOUSING AND FLYWHEEL.
This task covers:
a. Remove
b. Install
INITIAL SETUP
Tools
General Mechanics Tool Kit
(Item 1, Appendix B)
Torque Wrench
(Item 3, Appendix B)
Equipment Conditions
Pump disconnect from engine (para.4-21).
a. REMOVE (Figure 5-6).
(1)
(2)
(3)
(4)
(5)
Remove socket head capscrews (1), lockwashers (2), and flywheel housing (3).
Remove
Remove
Remove
socket head capscrews (4), lockwashers (5), and stub shaft (6).
flywheel screws (7), washers (8), and flywheel (9).
socket head screws (10), washers (11) and blower ring (12) from flywheel (9).
Inspect flywheel (3) and blower ring (12) for cracks and damage.
NOTE
The marks L or R on blower ring indicate direction of rotation of engine.
L = counterclockwise, R = clockwise when facing the flywheel.
b. INSTALL.<
(1)
(2)
(3)
(4)
(5)
(6)
Align holes on blower ring (12) with flywheel (9).
Install blower ring (12) onto flywheel (9) with washers (11) and socket head screws (10).
Align flywheel (9) with crankshaft (13). Then install flywheel (9) onto crankshaft (13) using washers (8)
and flywheel screws (7).
Torque flywheel screws (7) to 52 ftlbs (70.0 Nm).
Install stub shaft (6) to flywheel (9) with lockwashers (5) and socket head capscrews (4).
Install flywheel housing (3) with lockwashers (2) and socket head capscrews (1).
5-10