TM 10-4320-318-14
6-3. MAINTENANCE OF CAMSHAFT AND TIMING COVER- (Cont)
(1) Remove capscrews (1) and flat washers (2).
(2) Remove socket head capscrews (3).
(3) Tip engine over onto flywheel side.
(4) Install withdrawal screws into the two withdrawal holes (15).
CAUTION
Make sure both cam followers (Figure 6-2) are off cam points of camshaft
removing camshaft. Bending of cam followers may occur.
Figure 6-2. Cam Followers and Cam Points
(5) Turn withdrawal screws alternately in together one-half turn at a time until timing cover (4, Figure 6-1)
comes off with the camshaft (5).
(6) Remove gasket (6).
(7) Remove withdrawal screws from withdrawal holes (15).
6-3
