TM 10-4320-318-14
6-3. MAINTENANCE OF CAMSHAFT AND TIMING COVER- (Cont)
d.
REPAIR.
Repair is accomplished by replacement of defective parts.
e.
ASSEMBLE.
(1) If removed, insert new needle bearing (14) with the aid of mounting device (Figure 6-4).
Figure 6-4. Needle Bearing Installation
(2) Install oil seal (13, Figure 6-1) with lip facing camshaft gear.
(3) Install interim ring (12) and ball bearing (11) into timing cover (4).
(4) Install spacer (10) and press ball bearing (9) onto camshaft (5).
(5) Install flanged wheel (8) and circlip (7).
(6) Press camshaft (5) with ball bearing (9) into timing cover (4).
d.
INSTALL.
(1) Install gasket (6) onto timing cover (4).
(2) Align timing marks on the two teeth of gearwheel of camshaft (5) with timing mark on crankshaft gear.
Then install timing cover (4) with flat washers (2) and capscrews (1).
6 - 5
