Google+
Facebook
LinkedIn
Twitter
Digg
StumbleUpon
Home
Download PDF
Order CD-ROM
Order in Print
d. ASSEMBLE
Figure 5-3. Fuel Injection Pump
TM-10-4320-318-14 Centrifugal Pump Unit Water 125 (NSN 4320-01-156-3873) Model No. 2x2 SP/52109 EIC: ZHT Manual
Page Navigation
63
64
65
66
67
68
69
70
71
72
73
TM 10-4320-318-14
5-5. MAINTENANCE OF
FUEL INJECTION PUMP
.
This task covers:
a. Remove
c. Adjust
b. Install
INITIAL SETUP
Tools
General Mechanics Tool Kit
(Item 1, Appendix B)
Spill Device
(Item 4, Appendix B)
Dial Indicator
(Item 3, Appendix B)
Equipment
Conditions
Fuel lines disconnected as necessary (para.4-23).
Flywheel housing removed (para.5-6).
a.
REMOVE.
(1) Remove injection pump as follows:
(a) Place speed control lever (1, Figure 5-2) at START position (2). Ensure extra fuel button (7, Figure
5-3) is pushed in.
Figure 5-2. Speed Control Lever
(b) Remove nuts (1, Figure 5-3) and
fuel injection pump
(2).
(c) Remove and retain shims (3).
5-5
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business