TM 10-4320-318-14(a) Remove air filter element (para. 3-5).(b) Start engine briefly, then shut off. As engine decelerates, use oil priming device to apply 30weight oil (Item 7, Appendix E) liberally into air intake.(c) Replace air filter element (para. 3-5).CAUTIONUse care when storing or transporting pump unit to prevent damage to pump unit.4-10. Preparation of Pump Unit for Shipment. The pump unit is in a shippable form once it has been shutdownand stowed in accordance with the operating instructions. The pump unit foundation is provided with shackle holesfor lifting with a 4-legged sling and 4-point spreader bar. The shackle holes are also used to secure the pump unitto the decks of trucks, ships, or aircraft. Perform the following checks prior to transporting:Figure 4-1. Lifting with 4-Legged Slinga.Open noise enclosure access doors,b.Service engine air intake.(1) Remove air filter element (para. 3-5).(2) Start engine briefly, then shut off. As engine decelerates, spray 30 weight oil (Item 7, AppendixE) liberally into air intake.(3) Replace air filter element (para. 3-5).c.Close and secure noise enclosure access doors.4-3
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
