TM10-4320-315-24
4-7.MAINTENANCE OF OIL PAN AND BAFFLE PLATE
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
General Safety Instructions
General Mechanics Tool Kit
(Item 1, Appendix B)
WARNING
Materials/Parts
•
Solvent may cause toxic fumes. To prevent
personal injury, work only in well-ventilated area.
Sealant (Silicone)
DO NOT breath fumes for a long time.
(Item 16, Appendix C)
Rags (Item 12, Appendix C)
•
Solvent is flammable. To prevent fire or
Cleaning Solvent
explosion, DO NOT bring open flame or sparks
(Item 19, Appendix C)
near solvent.
Equipment Conditions
Engine removed from pump (para. 3-17).
a.
REMOVE. (Figure 4-9)
NOTE
•
Note location of long screw an d spacer for crankcase vent hose holder.
•
Cutout of baffle plate is towards dipstick.
(1)
Remove long screw (1), clamp (2), flat washers (3), and spacer (4).
(2)
Remove oil pan mounting screws (5) and flat washers (6).
(3)
Remove oil pan (7) and baffle (8).
(4)
Clean mating surfaces.
b.
INSTALL.
(1)
Apply silicone to mating surfaces. Install baffle plate (8) and oil pan (7).
(2)
Install flat washers (6) and oil pan mounting screws (5).
(3)
Install spacer (4), flat washer (3), clamp (2) for oil breather hose, and long screw (1).
4-15
