TM 10-4320-315-24
3-28. MAINTENANCE OF FRONT MOUNT PLATE AND MOUNTING FEET
This task covers: a.
Remove
b.
Install
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Tool Kit
Engine removed from pumping assembly
(Item 1, Appendix B)
(para. 3-17).
a.
REMOVE. (Figure 3-27)
(1)
Remove bolts (1), lockwashers (2), flat washer (3), and front plate (4).
(2)
Remove nuts (5), flat washers (6), bolts (7), and mounting foot (8) from each side of mount plate (4).
(3)
Remove bolts (9 and 10) holding mounting foot (11) to each side of flywheel housing.
b.
INSTALL.
(1)
Install mounting foot (11) to each side of flywheel housing with bolts (9 and 10).
(2)
Install on each side of mounting plate (4), a mounting foot (8) with bolts (7), flat washers (6), and nuts (5).
(3) Install front plate (2) with flat washers (3), lockwashers (2), and bolts (1). Figure 3-27. Front Mount Plate
3-60