TM10-4320-315-24
3-21. MAINTENANCE OF TURBOCHARGER
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
General Safetv Instructions
General Mechanics Tool Kit
WARNING
(Item 1, Appendix B)
•Solvent may cause toxic fumes. To prevent
Materials/Parts
personal injury, work only in well-ventilated area.
DO NOT breath fumes for a long time.
Gaskets (TM 10-4320-315-24P)
Lockwashers (TM 10-4320-315-24P)
•Solvent is flammable. To prevent fire or
Rags (Item 12, Appendix C)
explosion, DO NOT bring open flame or sparks
Cleaning Solvent
near solvent.
(Item 19, Appendix C)
Equipment Conditions
Oil inlet tube assembly removed (para. 2-45).
Engine and pump assembly removed (para. 3-17).
a.
REMOVE. (Figure 3-20)
(1)
Remove top cover of air outlet frame (para. 3-22).
(2)
Remove bolts (1), flat washers (2), nuts (3), and heat shield (4).
(3)
Loosen hose clamp (5) on intake manifold connection hose (6).
(4)
Disconnect exhaust pipe flange (7) by removing bolts (8) and lockwashers (9). Remove gasket (10).
(5)
Remove screws (11) and flat washers (23) securing oil drain tube (13) to turbocharger (24).
(6)
Loosen hose clamps (14).
(7)
Remove oil drain tube (13), gasket (15), and rubber hose (16).
(8)
Remove screws (17), flat washers (18), cover (19), and gasket (20).
(9)
Disconnect exhaust manifold (21) by removing bolts (22) and lockwashers (23). Remove gasket (24).
(10)
Remove turbocharger (25).
b.
INSTALL.
(1)
Clean all gasket mounting surfaces with cleaning solvent and rags.
(2)
Install turbocharger (25) on engine.
3-46
