TM10-4320-315-24
3-22. MAINTENANCE OF AIR OUTLET FRAME
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Engine removed (para. 3-17).
(Item 1, Appendix B)
Turbocharger removed (para. 3-21).
Materials/Parts
Lockwasher (TM 10-4320-315-24P)
a.
REMOVE. (Figure 3-21)
(1)
Remove bolts (1) and lockwashers (2) holding side of top cover (3).
(2)
Remove bolts (4), flat washers (5), and cover plate (6).
(3)
Remove two bolts (7) and lockwashers (8) from the inside of bottom case (9).
(4)
Remove top cover (3).
(5)
Remove bolts (10), lockwashers (11), and flat washers (12).
(6)
Remove bolts (13), lockwashers (14), and flat washers (15) that hold two clamps (16) and spacers (17) on oil
inlet line.
(7)
Remove bolts (18), lockwashers (19), flat washers (20), and lower case (9).
(8)
Remove threaded inserts (21) and flat washers (22).
b.
INSTALL.
(1)
Install flat washers (22) and threaded insert (21) on engine.
(2)
Position bottom case (9) on engine. Secure with flat washers (12), lockwashers (11), and bolts (10). Install
flat washers (20), lockwashers (19), and bolts (18).
(3)
Secure spacers (17) and clamps (16) that hold oil inlet line with flat washers (15), lockwashers (14), and bolts
(13).
(4)
Position top cover (3) over bottom case (9).
(5)
Install two lockwashers (8) and bolts (7) from the inside of bottom case (9).
(6)
Install cover plate (6) with flat washers (5), and bolts (4).
(7)
Install lockwashers (2) and bolts (1) that secure side of top cover (3).
3-49
