TM 10-4320-315-24
2-59. MAINTENANCE OF BRAKE SHOES AND WHEEL CYLINDERS-(Cont)
(b)
Install hand brake actuating lever (20) to front brake shoe (27) with pin (25) and snapring (24).
(3)
Install handbrake bracket (22) to rear brake shoe (20) as follows:
(a)
Insert pin (23) through handbrake bracket (22), flat washer (21) and rear brake shoe (20).
(b)
Install flat washer (19), spring washer (18) and snapring (17) on pin (23).
(4)
Position adjusting screw assembly and socket (16) between front and rear brake shoe assemblies and
install adjusting screw spring (15).
(5)
Position front and rear brake shoe assemblies on wheel hub. Then secure with bolt (11) and locknut (12).
(6)
Connect parking brake cable (13) to handbrake actuating lever (14).
(7)
Position front and rear brake shoe assemblies on wheel hub and install pins (7 and 10), springs (6 and 9),
and holddown cups (5 and 8).
(8)
Install side shoe spring (4).
(9)
Install washer (3) and lever and top shoe springs (1 and 2).
(10)
Install wheel and hub (para. 2-61).
c.
ADJUST.
(1)
Remove brake adjustment covers (32).
(2)
Using brake adjustment tool or screwdriver, turn starwheel on adjustment mechanism until wheels (33) are
locked.
(3)
Turn starwheel in other direction one complete turn. (Wheels should turn freely.)
(4)
Reinstall adjustment covers (32).
2-118
