TM 10-4320-315-10
Figure 2-5. Manual Mode Operation
(7)
Check that ENGINE VOLTS meter (1) Is indicating in green range.
(8)
Turn MANUAL THROTTLE (4) to desired speed. Refer to supervisor for instructions regarding desired speed
See Figure 2-8 (Control Panel Decals and Instruction Plates) operating graph.
CAUTION
The pump is self-priming after initial priming If pump does not prime within 3 minutes,
overheating and damage to seals may occur.
(9)
Check pump suction and discharge pressures. Shutdown engine if pump does not prime within 3 minutes
Refer to troubleshooting
2-22
