TM 10-4320-315-10
Figure 2-3. Pumping Assembly Fuel Selector Valves
i.
If engine is to be operated from trailer tank on pumping assembly, perform the following (Figure 2-3)’
(1)
Move fuel selector valve (6) to FUEL ON TANK position.
(2)
Move fuel return valve (1) to FUEL RETURN position.
j.
Prime fuel system (Figure 2-4).
WARNING
Cleaning any fuel spills prior to operating It is possible to pump up to one cup of fuel from
overflow valve
(1)
Open engine access door (3)
(2)
Place suitable container under fuel injection pump (1).
(3)
Open overflow valve (2) on fuel injection pump (1)
2-20
