Table 4-2. Unit Maintenance Troubleshooting (Continued)

Section IV. TROUBLESHOOTING - TM-10-4320-310-14_63

3. ENGINE RUNS UNSTEADILY AND POWER OUTPUT IS LOW

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
57

TM 10-4320-310-14 Table 4-2. Unit Maintenance Troubleshooting (Continued) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Death or serious injury could occur It fuel is not handled carefully. Use in a well-ventilated area away from open flame, arcing equipment, Ignition sources, heaters, or excessive heat. Always store fuel In properly marked containers. DO NOT SMOKE. a. Disconnect hose (1) from double ring piece (2) at fuel tank (3). Turn engine with crank handle (4). b. If fuel does not flow from hose (1), remove non-return valve (5). Check valve by shaking for free movement of internal valve ball. c. If necessary, clean with fuel. If unserviceable, replace non-return valve (5) (para 4-17). Step 3. Check that fuel flows through fuel system components (fuel tank, fuel lift pump, fuel filter and fuel lines) as engine is cranked by disconnecting component outlet hose(s). Replace defective component. Fuel tank - Refer to paragraph 4-19. Fuel lift pump - Refer to paragraph 4-18. Fuel filter - Refer to paragraph 4-17. Fuel lines - Refer to paragraph 4-17. Step 4. Notify direct support maintenance. 4-8

Privacy Statement
Press Release
Contact