TM 10-4320-307-24
2-25
PUMP ASSEMBLY SERVICE.
This task covers:
a. Cleaning
b. Servicing
INITIAL SETUP
Tools
General Safety Instructions
Tool kit, general mechanics (Item 1, Appendix B)
Well ventilated area
Materials/Parts
Dry cleaning solvent (Item 30, Appendix C)
Lubricating oil (Item 30, Appendix C)
Suitable container
CLEANING:
Dry cleaning solvent is potentially dangerous. Avoid repeated and prolonged breathing
of vapors and skin contact with the liquid. Do not use near open flame, arcing
equipment, or other ignition source. Always wear eye protection and protective clothing.
Death or serious Injury could occur if compressed air is directed against the skin. Do not
use compressed air for cleaning or drying unless the pressure is/has been reduced to 30
psi (2.11 kgcm 2) or less. When working with compressed air always use chip guards,
eye protection, and other personal protective equipment.
1.
Remove all oily dirt, grease, and diesel fuel from areas surrounding pump assembly drain plug (1), oil fill cap (2), and
sight glass (3) with dry cleaning solvent.
2.
Dry all parts with compressed air.
2-70
