TM 10-4320-307-24
2-25
PUMP ASSEMBLY SERVICE (CONT).
SERVICING:
NOTE
Drain oil while warm.
Fill with clean lubricating oil.
1.
Drain oil as follows:
a.
Place a drain pan under oil drain plug (1). Loosen oil fill cap (2).
b.
Remove drain plug and drain oil.
c.
Replace drain plug and tighten.
d.
Repeat steps a through c on opposite bearing housing.
2.
Fill oil as follows:
a.
Remove oil fill cap (2).
b.
Fill until oil sight glass (3) shows oil sump is full.
c.
Replace oil fill cap.
d.
Repeat steps a through c on opposite bearing housing.
2-71
