TM 10-4320-307-24
2-23
ENGINE ENCLOSURE REPAIR/REPLACE (CONT).
10.
Position heat exchanger (20) on engine enclosure (4).
11.
Install five bolts (21), washers (22), and nuts (23) and
secure heat exchanger and mounting bracket (20) to
engine enclosure (4).
12.
Install cold starting aid and knob and cable assembly
(24) through engine enclosure (4).
13.
Slide backup nut (25) onto cable assembly (24) and
faster to engine enclosure (4).
14.
Insert cable assembly (24) into clamp (26) and tighten
two bolts (27).
15.
Install cable to valve (28) and tighten screw (29).
16.
Final cable adjustment may be necessary.
2-65
