TM 10-4320-307-24
2-23
ENGINE ENCLOSURE REPAIR/REPLACE (CONT).
13. Remove door assembly (23) as follows:
a.
Lift handle (24) and open door assembly until
hold opening device (25) locks.
b.
Remove eight self tapping screws (26) that
secure hold opening device (25) to the frame
and door assembly. Remove hold opening
device (25).
c.
Lift door assembly (23) from hinges and
remove.
d.
Repeat steps a through c from remaining three
doors.
14. Remove side panel assembly (27) as follows:
a.
From inside engine enclosure (3), rotate handles
and remove side panel.
b.
Repeat step a for opposite side.
2-58