TM 10-4320-307-24
2-22
TANK ASSEMBLY REPAIR/REPLACE (CONT).
INSTALLATION:
Death or serious injury could occur if diesel fuel is not handled carefully. Use
in a well ventilated area away from open flame, arcing equipment, ignition
sources, heaters, or excessive heat. Always store fuel in properly marked
containers. DO NOT SMOKE.
Death or serious injury could occur if unauthorized or unnecessary personnel are
in the hoisting area. Permit only personnel actually engaged in the hoisting
operation to be near the unit and hoisting equipment. All instructions for the
hoisting operations must come from one authorized person. Be sure hoisting
equipment is suitable for the size of the load. Total weight of the fuel tank
assembly is 231 lbs.
1.
Position a suitable lifting device over the fuel tank assembly.
2.
Attach slings to lifting eyes and put tension on slings. Make sure assembly is properly supported.
3.
Lift and remove tank assembly (1) from blocks on the work platform and position on skid assembly (2).
4.
Apply adhesive sealant to four screws (3) and install screws (3), washers (4), and nuts (5) and secure fuel tank (1) to
skid assembly (2).
5.
Install feeding system in accordance with paragraph 2-21.
2-53
