TM 10-4320-307-24
2-23
ENGINE ENCLOSURE REPAIR/REPLACE (CONT).
2.
Loosen clamp (4) and remove exhaust piping (5)
from engine enclosure (3).
3.
Loosen screw (6) and (7). Remove cold starting aid
control cable and knob (8) from clamp (9).
4.
Loosen and remove nut (10).
5.
Remove cold starting aid control cable and knob (8)
from engine enclosure (3).
6.
Remove five bolts (11), washers (12), and nuts (13)
from speed increaser heat exchanger (14) and
mounting bracket.
7.
Remove heat exchanger (14) from engine enclosure
(3).
2-55
