TM 10-4320-307-24
2-13.3 BATTERY SERVICING AND CABLE CONNECTION (CONT).
b.
Connect battery cables as follows:
When connecting battery cables always connect positive terminal first.
CAUTION
Avoid making contact across the two battery posts. This can result in severe arcing.
(1)
If connections are coated with preservative, use a battery brush to clean the cable and battery terminals.
(2)
Install and tighten the battery cables In accordance with battery connection label (3) on battery cover (4).
(3)
Use grease MIL-G-10924 to coat the battery terminals to prevent corrosion.
(4)
Install battery cover and snap clips
2-13.4 PRIMING ENGINE FUEL SYSTEM.
a.
Prime engine fuel filters as Follows:
(1)
Using a Filter wrench, remove both fuel filters.
(2)
Using a clean lint-free towel, clean the filter head gasket
surfaces.
(3)
Apply a light Film of clean engine oil to [he filler gasket
surfaces.
(4)
Fill the filters with clean fuel.
(5)
Install the filters on the filter heads. Tighten the filters un-
til the gaskets contact the filter head surface.
(6)
Tighten the filter an additional one half to three-fourths
(1/2 to 3/4) turn after the gasket contacts the filter head
surface.
2-14
