TM 10-4320-307-24
3-10
CASING AND COVER REPLACE.
This task covers:
a. Removal
b. Cleaning/lnspection/Repair c. Installation
INITIAL SETUP
Tools
Tool kit, general mechanic's (Item 1, Appendix B)
Suitable lifting device
Materials/Parts
Suitable blocks Crocus abrasive cloth (Item 1,
Appendix C)
Moldable polymer gasketing (Item 21, Appendix C)
Spray solidifying agent (Item 29, Appendix C)
Equipment
Condition
Reference
Condition Description
Paragraph
Suction and discharge
2-56
assembly removed
Paragraph
Pump assembly drained
2-25
Paragraph
Flexible coupling removed
3-7
Paragraph
Piping and vent assembly
2-26
removed
Paragraph
Pump assembly removed
3-8
Paragraph
Mechanical seal and
3-11
bearing assembly removed
General Safety Instructions
Well ventilated area
Insure proper lifting methods and procedures
REMOVAL:
Death or serious injury could occur if unauthorized or unnecessary personnel are in the hoisting
area. Permit only personnel actually engaged in the hoisting operation to be near the unit and
hoisting equipment. All instructions for the hoisting operations must come from one authorized
person.
Injury to personnel or damage to equipment could occur from improper hoisting. Hoist the load
slowly to avoid tearing out lifting bail assembly, slipping slings, or load shift. Do not jerk the
load or swing it from side-to-side when hoisting. This places additional stress on hoisting
components which can cause failure and loss of load. Be sure hoisting equipment is on solid
footing and is suitable for the size of the load. Watch boom angle and overhead clearance when
hoisting.
3-23
