TM 10-4320-226-14
2.7 PREPARATION FOR MOVEMENT.
The 350 GPM Pumping Assembly can be moved either short distance around a worksite
or long distance to another location.
The following paragraphs provide information
to prepare the 350 GPM Pumping Assembly for movement.
2.7.1 Preparation for Movement at Worksite.
Perform the following to move 350 GPM Pumping
Assembly to another location at a worksite.
a.
If operating, perform shutdown procedures provided in paragraph 2.5.2.
Figure 2-8.
Disconnecting Suction and Discharge Hoses.
b.
Disconnect suction hose (1,
figure 2-8) from coupler half (2) and connect
quick disconnect plug (3) to coupler half (2).
c.
Disconnect discharge hose (4) from coupler half (5) and connect quick
disconnect cap (6) to coupler half (5).
2-24