Do not stand under 350 GPM Pumping Assembly.

Figure 2-4. Concocting Suction and Discharge Hoses

TM-10-4320-226-14 Water Pumping Assembly Diesel Engine Driven Wheel Mounted 350 Gallons Per Minute (GPM) 275 Foot Head Models: 350 PAW Manual
Page Navigation
34

TM 10-4320-226-14 The following installation procedure must be made with the assistance of unit level maintenance personnel. d. When loaded on a flat bed truck perform the following: (1) (2) (3) (4) (5) Do not lift 350 GPM pumping assembly without lifting device. Failure to obey this warning may result in serious personal injury. Do not stand under 350 GPM Pumping Assembly. Failure to obey this warning may result in serious personal injury. Attach lifting equipment to lifting support and remove tiedown chains from 350 GPM Pumping Assembly. Lift the 350 GPM Pumping Assembly from flatbed trailer. Position pumping assembly as close as possible to water source. Keep suction lift as low as possible. To prevent rolling or sliding, do not work on equipment that is not securely stabilized. Ensure both wheels of the equipment are secure. Failure to obey this warning may result in serious personal injury. Secure wheels (6). Refer to data plate and ensure two fuel selector valves (7) are positioned as follows: Fuel tank as source to TANK Auxilarv supply as source to FUEL AUX 2-13

Privacy Statement
Press Release
Contact