TM 10-4320-226-14
f.
When coupling and rings are aligned, push engine assembly forward until
coupling completely engages.
Ensure studs of intermediate bracket align with
holes on engine assembly.
g.
Install six bolts (view C, 12), beveled washers (11), twelve washers (10) and
six lock nuts (9).
h.
Install two shields (view B, 8), four washers (7), twelve lockwashers (6) and
bolts (5).
Do not leave
to obey this
mounting holes for lifting eyes uncovered.
Failure
caution could result in equipment damage.
i.
Remove engine sling and two lifting eyes (view D, 14) and install two
plugs (13).
j.
Uncover hose (view A, 4)
k.
Position hose (4) to fuel
l.
Connect overflow line (1)
and fuel pump port.
pump and install washers (3) and banjo bolt (2).
from injector nozzle to fuel tank.
5-8
