TM 10-4320-226-14
f.
g.
h.
i.
j.
k.
Do not lift heavy assemblies without lifting device.
Failure to obey
this warning may result in personal injury or death.
Do not install lifting eyes until mounting holes have been
inspected and cleaned.
Failure to obey this caution could
result in equipment damage.
Two personnel are required to remove engine.
Install two lifting eyes (14) and attach engine
Slowly raise engine sling until engine assembly
Move engine assembly (15) back, away from pump,
disengages from pump connection ring.
sling.
(15) just clears mounts.
until flexible coupling
Move engine assembly (15) completely clear of lifting bail of 350 GPM Pumping
Assembly frame.
Position engine assembly (15) on engine stand.
Remove two lifting eyes (14) and install plugs (13).
5.5.1.2 Installation.
Do not lift heavy assemblies without lifting device.
Failure to obey
this warning may result in personal injury or death.
Do not install lifting eyes until mounting holes have been
inspected and cleaned.
Failure to obey this caution could
result in equipment damage.
Two personnel are required to remove engine.
a.
Remove two plugs (view D,
13) and install lifting eyes (14).
b.
Attach engine sling to two lifting eyes (14).
c.
Move engine assembly (15) clear of stand and position over frame.
d.
Lower engine assembly (15) and position below lifting bail and move toward
pump assembly.
e.
Align flexible coupling of pump with pump connecting ring. This requires slow
movement of engine assembly (15).
5-7
