TM 10-4320-226-14
4.10.17 Fuel Feed Pump Maintenance.
This task covers:
4.10.17.1 Removal
4.10.17.3 Installation
4.10.17.2 Servicing
INITIAL SETUP
Tools
General Mechanics Tool Kit
Section III, Item 1)
General Safety Instructions
(appendix B,
To prevent rolling or sliding, do not
work on equipment that is not securely
Material/Parts
Preformed packing (TM 10-4320-226-24P)
Equipment Conditions
Equipment shut down, refer to
paragraph 2.5.1.2 or 2.5.2.2.
stabilized.
Do not smoke or use open flames around
fuel.
DO not operate equipment in enclosed
area unless exhaust gases are piped to
outside and adequate ventilation is
provided.
Do not work on equipment without
following standard shop safety
precautions.
Figure 4-27.
Fuel Feed Pump Maintenance.
4-52