TABULATED DATA

Figure 1-7. Filter/Separator Flow Chart.

TM-5-4930-230-13 Tank and Pump Unit Liquid Dispensing for Truck Mounting (Advanced Industries Model 1800) FSN 4930-070-1181 Manual
Page Navigation
9

TM5-4930-230-13 1-9. TABULATED DATA a. Identification. I.D. Plates are: (figures 1-8 and 1-9). (1) Engine Manufacturer’s I.D. Plate is located on the motor and specifies the serial number, size, rpm, specification number, displacement, and date of manufacture (GED ONLY). (2) Tank and Pump Unit I.D. Plate is located on the lower left frame. (3) Tank I.D. Plate is located on the top-center, front of each of the two tanks. It specifies capacity, national stock number, serial number, manufacturer, date of manufacture, weight (empty), and fuel weight (in pounds-per-gallon). (4) Pump Unit I.D. Plate is located on the lower right frame. (5) Pump Assembly (EMD) I.D. Plate is located on top of base plate. b. Dimensions and Weight. (1) Pumping Assembly. Length 78 in. (198.12 cm) Width 37 in. (93.98 cm) Height 50 in. (127.00 cm) Weight 765 lb. (347.00 kg) (2) Tank. Capacity 600 gal. (2271.00 liters) Length 56 in. (142.24 cm) Width 72 in. (182.88 cm) Height 56 in. (142.24 cm) Weight 525 lb. (238.14 kg) (3) Electric Motor. Length 16.58 in. (42.11 cm) Width 5.59 in. (14.46 cm) Height 6.34 in. (16.10 cm) Weight 86.5 lb. (39.32 kg) Input 24 Vdc Rated current (at 1.5 hp load) 55A Rated Speed (with motor at 35°C) 3600 rpm Operating speed 3100 rpm (4) Gasoline Engine. Refer to TM 5-2805-257-14 for data. 1-9

Privacy Statement
Press Release
Contact