INTERVAL
ITEM
NO.
ITEM TO BE INSPECTED
PROCEDURE
Equipment is
Not Ready/
Available
TM 5-4320-306-10
Table 2-2. Preventive Maintenance Checks and Services - Continued
B - Before Operation
A - After Operation
D - During Operation
W - Weekly
B
D
A
W
29
Starter Assembly (1).
Evidence of arcing,
overheating,
Visually inspect wires for loose ring terminals (2),
binding, or
loose connection at starter posts (3), burn marks at cracking.
connections (arcing), corrosion of ring terminals (2)
or starter posts (3), damaged wire insulation (4),
burned or melted insulation (4) (overheating), and
frayed or worn spiral wrap tubing (5).
Visually inspect starter (6) for goose mounting
screws (7).
30
Air Cleaner Assembly (1).
Check air cleaner restriction indicator (2). If red
band appears in window, press and release reset
button. If red band reappears, refer to Table 3-1,
Troubleshooting.
TM 5-4320-306-10
2-40
