TM 5-4320-302-14
6-12. ADAPTER HOUSING AND BEARING PLATE ASSEMBLY (CONT)
Location/Item
Action
Remarks
bearing housing is rusted or corroded, remove
rust or corrosion, reclean, and treat surfaces
in accordance with MIL-T-704. Do not finish
surfaces with any paint-type materials.
b. Replace mounting hardware, stop ring, nozzle,
washers, and bearing bush if damaged, worn,
rusted, or corroded. Do not attempt repairs.
ASSEMBLY
NOTE
When bearing bush is pressed into bearing housing, make sure
that oil holes are alined properly.
6-72