ADAPTER HOUSING AND BEARING PLATE ASSEMBLY (CONT)

ADAPTER HOUSING AND BEARING PLATE ASSEMBLY (CONT) - TM-5-4320-302-14_468

ADAPTER HOUSING AND BEARING PLATE ASSEMBLY (CONT) - TM-5-4320-302-14_470

TM-5-4320-302-14 Forward Area Water Point Supply System (FAWPSS) Model WP55100 NSN 4320-01-168-1629 and Model 9095-91 NSN 4320-01-338-3305 Manual
Page Navigation
461

TM 5-4320-302-14 6-12. ADAPTER HOUSING AND BEARING PLATE ASSEMBLY (CONT) Location/Item Action Remarks b. Remove auxiliary nuts and bolts. Install hex bolts and spring lockwashers in bearing housing. Using a socket wrench, alternately and evenly tighten bolts across bearing housing to 22.13 ft lb (30 N.m) torque. Using an angular torque gage, tighten bolts an additional 60 degrees. 23. Bearing hous- Measure axial play or radial clearance between ing and outside of bearing housing and crankshaft. crankshaft Normal radial clearance ranges from 0.0024 to 0.0046 inch (0.06 to 0.118 mm). Maximum radial clearance limit is 0.0118 inch (0.30 mm). If axial play or radial clearance is not as specified, remove bearing housing and add or remove gaskets as required. 24. Main bearing Install main bearing shaft seal guide No. 142510 shaft seal on crankshaft and tighten two bolts. guide 6-75

Privacy Statement
Press Release
Contact