TM 5-4320-302-14
6-12. ADAPTER HOUSING AND BEARING PLATE ASSEMBLY (CONT)
Location/Item
Action
Remarks
4. Stop ring
Remove stop ring from crankcase and bearing housing.
5. Gaskets
Remove and discard.
DISASSEMBLY
6. Nozzle
Remove nozzle and spring lockwasher from bearing
housing. Discard lockwasher.
7. Bearing bush
Press out bush from
bearing housing
using main bearing
mandrel No. 143700
with (camshaft)
bearing mandrel
No. 143620.
CLEANING/INSPECTION
WARNING
Severe burns, illness, or death may result if personnel fail to
handle diesel fuel oil properly. Observe the following precautions:
· Do not inhale vapor.
· Work in a well-ventilated area.
· Do not use near open flame, sparks, or excessive heat.
Death or severe injury might result when compressed air is used to
blow dirt from skin or clothing. Air entering body openings is
extremely dangerous. Compressed air used for cleaning shall not
exceed 100 psi (690 kPa). Use goggles or face shield for eye
protection. Do not direct airstream against skin.
8. Adapter hous-
Clean components with VV-F-800 diesel fuel oil.
ing and bear-
Dry with compressed air.
ing plate
assembly
6-69
