TM 5-4320-302-14
6-7. FRONT COVER (CONT)
Location/Item
Action
Remarks
ASSEMBLY
14.
Needle sleeve
Press in with drive shaft sleeve mandrel No.
144730 until flush with recess in front cover.
15.
Shaft seal
Press in with drive shaft seal mandrel No.
144720. Apply MIL-L-2104 lubricating oil to seal lip.
16.
Bush
Press in from inside front cover. Make sure bush
extends 0.18 inch (4.5 mm) out past fuel in-
jection pump seating.
6-27
